According to the different production process, it can be divided into two types of casting and sintering. The mechanical strength of the sintering is higher than that of the casting. The processed products are relatively simple, and it is easier to produce small and irregular products. The cast aluminum nickel and cobalt can be processed and produced in different sizes and shapes, with high strength, strong corrosion resistance, no coating on the surface and good temperature stability. Cast aluminum nickel cobalt can work at high temperature (the highest working temperature can reach 500 degrees Celsius). Although other magnetic materials have stronger coercivity, the high remanence, thermal stability and high corrosion resistance of the aluminum nickel and cobalt have made it more different from other magnetic materials. With high magnetic flux density, good time stability, low temperature coefficient, low demagnetization and magnetic demagnetization in magnetic circuit structure, the magnetic properties can be fully used, and the hardness is high, it is only suitable for grinding.

This kind of magnet is widely used in instruments and meters and some areas with high temperature stability requirements. Such as auto ignition permanent magnet motor, motor, distributor, relay, controller, generator, receiver, separator, inductor, microphone, loudspeaker, measuring instrument micro motor, electroacoustic device, microwave device, magnetic transmission device and other fields.

Magnetic properties of sintered alnico

材料牌號Grade	剩磁Br	矯頑力Hcj	最大磁能積(BH)max	居里溫度Tc	工作溫度Tw	溫度系數aBr
	mTGs	kA/mOe	kJ/m3MGOe	℃	℃	%/℃
FLN8	500/5000	40/500	9/1.13	760	450	-0.022
FLNG12	700/7000	48/600	12.4/1.55	810	450	-0.014
FLNGT18	600/6000	90/1130	18/2.20	860	450	-0.02
FLNG34	1200/12000	48/600	34/4.25	890	450	-0.016
FLNG37	1250/12500	48/600	37/4.62	890	450	-0.016
FLNGT28	1050/10500	60/600	28/3.50	850	450	-0.02
FLNGT38	800/8000	120/1500	38/4.75	850	450	-0.02
FLNGT42	880/8800	120/1500	42/5.25	820	450	-0.02
FLNGT33J	700/7000	140/1750	33/4.13	850	450	-0.025

Properties and physical properties of cast aluminum, nickel and cobalt

Grade	MMPAEquivalent	BrmT(Gs)	bHcKA/m(Oe)	BHmaxKJ/m3(MGOe)	Densityg/cm3	Br.Temp.Coefficient%/℃	CurieTemp.℃	Remarks
LN9	AlNiCo-3	680	30	9	6.9	-0.03	760	Isotropic
		-6800	-380	-1.13
LN10		600	40	10	6.9	-0.03	760
		-6000	-500	-1.2
LNG12	AlNiCo-2	720	45	12.4	7	-0.03	810
		-7200	-560	-1.55
LNG13		700	48	13	7	-0.03	810
		-7000	-600	-1.6
LNG34	AlNiCo-5c	1200	48	34	7.3	-0.02	860	Anisotropic
		-12000	-600	-4.3
LNG37	AlNiCo-5	1200	48	37	7.3	-0.02	860
		-12000	-600	-4.65
LNG40		1250	48	40	7.3	-0.02	860
		-12500	-600	-5
LNG44	AlNiCo-5DG	1250	52	44	7.3	-0.02	860
		-12500	-650	-5.5
LNG52	AlNiCo-5～7	1300	56	52	7.3	-0.02	860
		-13000	-700	-6.5
LNGT28	AlNiCo-6	1000	58	28	7.3	-0.02	860
		-10000	-720	-3.5
LNGT36J	AlNiCo-8HC	700	140	36	7.3	-0.02	860
		-7000	-1750	-4.5
LNGT32	AlNiCo-8	800	100	32	7.3	-0.025	860
		-8000	-1250	-4
LNGT40		800	110	40	7.3	-0.025	860
		-8000	-1380	-5
LNGT60	AlNiCo-9	900	110	60	7.3	-0.025	860
		-9000	-1380	-7.5
LNGT72	AlNiCo-8	1050	112	72	7.3	-0.025	860
		-10500	-1400	-9
LNGT80		1100	115	80	7.3	-0.025	860
		-11000	-1450	-10